Flexibility Is The Key The ‘Lynx ’uses a non-handed, dual-purpose coil block within a galvanised steel ‘V ’formed condensate pan, terminating with a central drain connection at it ’s lowest point. A single design is used on both RH and LH configurations allowing the complete coil and condensate pan assembly to be reversible on site without the need for any additional components. The discharge plenum is supplied with spigots fitted at customer specified positions and a single blanking plate, all of which are screw fixed to facilitate spigot interchange on site. The additional facility to re-locate the control box from one side of the unit to the, other ensures the ‘Lynx ’is amply flexible to accommodate site layout changes and client fit-outs.

Access For Maintenance Filters are simple to remove for cleaning; they withdraw from either the rear or side of the unit without the use of tools or need to remove panels. Models 4 to 7 are supplied with split filters for easier removal and handling. The main access panel is secured using four sets crews, which are retained during the removal of the panel due to the use of ‘keyhole ’slots,and provides access to the condensate pan and fan/motor assemblies. Each fan/motor is independently mounted onto the main bulkhead to enable easy

Quiet, Powerful Operation The ‘Lynx ’incorporates thermally protected internal rotor motors fitted with ‘sealed for life ’bearings. Combinations of single and double shaft motors are used to generate the several fan permutations necessary for the entire range. Each fan/motor assembly is independently mounted onto the floating bulkhead, isolating them from the unit chassis, reducing resonance and casing breakout noise. Fan speed control is via an autotransformer, which ensures greater performance flexibility. Six main transformer tappings, together with three fine adjustment tappings, make seventeen fan speeds available for accurate commissioning.

Condensate Pans ‘Lynx ’fan coil units feature a fully welded galvanised steel condensate pan. The ‘V ’formed pan creates a positive seal against the coil preventing any air bypass and is mounted to provide a positive fall in two directions to the central outlet at its lowest end. The 22mm OD stainless steel drain connection is located in a unique sump to ensure the condensate drains completely. The rigidity of the folded component offers extra protection against accidental site damage.

Adaptable Controls Box ‘Lynx ’units are supplied with a well ventilated control box fitted with a one metre flying lead for connection to an adjacent fused spur. Also housed in the box are the mains fuse holder complete with a spare fuse, auto-transformer, ‘fan speed ’and ‘fine adjustment ’ switches. The control box features two hinged lids to provide improved access to either stand-alone or DDC controls. It is electrically connected to the fan/motor(s) via a quick release connector, a feature that enables it to be disconnected from the unit for refurbishment or to be retrofitted subsequent to the installation of the unit. The autotransformer incorporates, as standard, a 30VA 24V AC isolated supply for the operation of the control loop.

Please request a catalogue for more detailed specifications on this product
or
View a copy of our catalogue for the Lynx Fan Coil Units
(to download right click above link and select 'Save Target As...')
in Adobe Acrobat PDF Format

Home • Contact Us • Catalogue Library • Catalogue Request • Product Guide

Dunham-Bush Limited Registered in the UK - Reg No. 876216