Dunham-Bush Limited - fan coil units, fan convectors, unit heaters, door curtains, radiators.... perimeter and radiant heating

Door Curtain
	Sentry	The technology of door curtains, like the Sentry, is well proven: a heated air-stream above an open doorway provides a virtual barrier which separates indoor and outdoor environments. Thus reducing heat losses and conditioning incoming air. This is achieved with no restriction on pedestrian traffic.
Fan Coil Units
	'F' Fan Coil Units	Units provide comfort cooling and heating when used with chilled and hot water services. The 'F' Fan Coil Units are 'commercially quiet' and the optional accessory, fitted acoustic treatment, can be further applied to reduce sound levels. Typically used in office buildings, hotels, restaurants and department stores.
	Cougar	'Cougar' units have a draw through design and comprise of a washable air filter, dual purpose coil with separate connections for cooling and heating, and low noise external rotor motors/fans.
	Leopard	Use of the highest quality components available is never more important than in the case of the fans / motors to ensure that quiet and powerful operation is consistently achieved year after year.
	Lynx	‘Lynx ’fan coil units are built to no-compromise engineering standards using the best value components available. Combined with the latest design and manufacturing technology, the ‘Lynx ’provides the ideal solution where the most exacting thermal and noise criteria is demanded on a finite budget.
	Panther	The 'Panther' incorporates high performance, external rotor motor fans as standard. This design concept ensures that lower noise levels and higher air volumes are achieved than by contemporary fan decks.
Fan Convectors Heaters
	600-Series	The ideal heating solution where wall space is not available and surface mounted ceiling units cannot be used. The unit is specifically designed for integration with ceiling grid applications such as in schools, colleges, offices, libraries and commercial properties.
	Avant-garde	Avant-garde is the next generation heat emitter. Careful and ingenious design of Dunham-Bush’s ‘avant-garde’ allows condensing boiler plants to operate at maximum efficiency at all times and with the minimum of capital investment. The extensive Dunham-Bush range of Series AM and Series BM units are all available in the ‘avant-garde’ variant.
	Series AM Comfort	Heaters provide warm air heating when connected to a low or medium temperature hot water system and a single phase electrical supply. AM fans convectors are used for many applications, such as: schools, colleges, elderly persons' homes, libraries, offices and churches.
	Series AM SuperComfort	SuperComfort fan convectors operate with a low temperature hot water supply, to provide quiet, efficient, rapid response warm air heating in schools, offices and many other similar applications. Fitted with low temperature cut out thermostat which prevents heater operation until the heating water is hot enough for it to work efficiently. All models have safety in mind, having all metal rounded corners, pencil proof grilles and access panel security locks.
	Series BM Comfort	BM Fan Convectors provide warm air heating when connected to a low or medium temperature hot water system and a single phase electrical supply. It is an ideal heating product for many applications, such as schools ,colleges, elderly persons' homes, libraries, offices and churches. It is suitable for wall, ceiling and base mounting.
	Series CM	Most suitable where low-level free standing heaters are desirable. Heaters provide air heating, when connected to a low temperature hot water system and an electrical supply. Typical applications include: schools, colleges, elderly persons' homes, libraries and offices.
L.S.T. Radiators
	Warmsafe	Warmsafe LST Radiators are design to provide comfort heating in applications where safety is paramount. The heat emitter is totally enclosed in the L.S.T casing with inlet and outlet grilles, designed to exclude 'small hands.' The mainly connective heat output promotes good room air circulation and ensures cool casing touch temperatures, which conform to the NHS Estates Health Guidance Note on "safe" Hot Water and Surface Temperatures. For this reason it is especially useful in hospitals and care homes.
Perimeter Heating
	Finvector	Finvector is the flexible solution for heating both modern and traditional buildings providing a silent, low maintenance service. It is suitable for a variety of applications such as offices, schools, colleges, libraries, hospitals, churches, airports and light industrial premises. Finvector usually operates on pumped hot water but it can also be used with low pressure steam. Heat is provided by natural convection around the perimeter of a room. A warm air curtain offsets downdraughts from windows ensuring comfortable conditions.
	Trench Finvector	Trench finvector provides a natural convection heating around the room perimeter and produces a warm air curtain which off-sets down draught and heat losses. It is suitable for operation with a pumped hot-water or low pressure steam system and is the ideal solution where wall space is limited or unavailable to accommodate conventional Finvector Perimeter Heating.
Radiant Heating
	Dunham Strip	Dunham Strip is the ideal solution for industrial radiant heating from a central plant. It is supplied in simple, modular strips ready for installation and connection to pumped hot water or steam systems. Radiant heating will heat building occupants directly without the need to warm the surrounding air. Dunham strips radiant heating is the ideal choice for large, open industrial buildings where cost, low maintenance and simplicity are primary considerations. Typical applications include aircraft hangers, bus garages and spray booths.
	Evo-Lite	Dunham Bush Evo-Lite is a radiant heating panel system for applications where heat output demand requires a cost-effective solution .It realises a simple yet innovative design, the superior product finish is complemented by light construction and simple installation. Evo-Lite radiant panels are designed for a wide range of applications, in particular hospitals, school classrooms, assembly halls, residential care homes and offices.
	Evolution Radiant Panels	Each Evolution panel consists of a heat radiating extruded aluminium plank(s) attached to a copper tube(s). The panel is usually mounted at higher levels, to provide comfort heating when connected to a low temperature hot water system. Evolution radiant panel heating is suitable for a wide range of applications and in particular, hospitals and educational establishments.
Unit Heaters
	Series UH	Series UH Unit Heaters are intended to provide warm air heating in industrial buildings when used in conjunction with a pumped hot water or steam system. They are normally suspended at high level and may be used in the horizontal or vertical discharge mode. Typical applications include factories, warehouses and work shops.